Bignet

BIGNET is high end technology based product design on advance
micro-prosser.It is featured with hybrid of addressable &
conventional panels stand between addressable benefits &
conventional cost. Professionally developed with prime moto for
Indian concern as minimum wiring, user friendly commissioning
for technician / electrician / installer.

BIGNET is high end technology based product design on advance
micro-prosser.It is featured with hybrid of addressable &
conventional panels stand between addressable benefits &
conventional cost. Professionally developed with prime moto for
Indian concern as minimum wiring, user friendly commissioning
for technician / electrician / installer.

BigNetT Panel works on four wire network including detector, manual call point, sprinklers
system as required with the help of modules. So it is more economical due to:-
1:- Cable/wirring cost saving up to 70%.
2:- Time saving in laying of cable/wire due few numbers of wire & length thus labour task
component also economical.
3:- There is not big bunch of wires/cales so maintenance is much easier .
4:- Bignet provide location address in number format that is quick way for locate fire/foult.
5:- Advance & compact circuitry for future maintenance angle.

1-Operates on 220 V AC supply.
2-Stand by battery backup with Built in charging.
3-Error free panel status in unambiguous colored LED indication.
4-System on Mains ON battery Low status indication.
5-Suppots up to 56 module.
6-Module wise fire fault Operating indication Facility.
7-Laptop/PC Based addressing facility.
8-Datalodger via external PC& external printer based print out with time stamp.
9-Manual test facility
10-Rugged CRCA sheet with powder coated finish.
11-Compect size, Sleek Design.
12-Relay module Output for associate AHU, Pressure fan etc .
MECHANICAL CONSTRUCTION
The enclosure of the panel is constructed by CRCA Sheet with powder-coated finish and its designed to afford
the degree of protection as per IP54 , The 20 mm Knock outs are given for cable entry at the top of the cabinet.
The Panel has a built in battery space for 2Nos of 12 V , 7 AH Batteries.
The front side of the panel consist of the following
1) Control Switches
3) 40 X 4 Blue back LCD
Technical Data
4-RS-485 Protocol based Hybrid system.
2) LED Indication

OPERATING VOLTAGE : 24 DC+ 10%
MAINS SUPPLY : 190V AC-240V AC
STAND BY SUPPLY : 24V/4.5Amper
HOOTER OUTPUT : 24V/2Amax
RELAY RATING : 24V/3Amp
POTENTIAL FREE CONTACT : FIRE & FAULT
VOLTAGE CHARGER : 26.6V

 

No of Module supported : 56
Wire between Panel to module : 4
Network : RS-485
Protection :DC FUSE in each Module
WEIGHT : 6 KG APPROX.

Leave a Comment

Your email address will not be published. Required fields are marked *

× How can I help you?