Your WDAMX Water Alarm panel comes with its internally
power unit, main mother board card control unit with the space of
2no. 7AH battery, 4 different zones line with the visual Hooter
lines and common Hooter point which gives continuous output
voltage. Also has provision of extra relay contact
(1) Micro controller based & fault monitoring system.
(2) Zones wise/common Hooter facility.
(3) Zones wise 1 sets of common potential free Relay
contact in fault condition.
(4) Control key tactile type switch for prompt action
(5) In built battery charger & AC to DC change over & vice
versa.
(6) Additional gadget facility option available through relay.
(7) Visual indication of common leakage, common Fault
mains, charging, low battery etc.
(8) In built auto charging.
(9) Audio visual indication for leakage/fault.
(10) Common silence switch for accept of (leakage/Fault zone
/power) and respective common relay.
(11) In silence condition sounder again restart in the event
of leakage or Fault in other zone for silence again, press silence
switch.
1) OPERATING VOLTAGE : 24 DC+ 10%
2) MAINS SUPPLY : 230V AC 190V AC
3) STAND BY SUPPLY : 24V/250Ma
4) AUXILIARY OUTPUT : 12V/250Ma
5) AUXILIARY OUTPUT : 24V/1Amp
6) VOLTAGE CHARGER : 26.6V
7) STAND BY CURRENT : 15.6Ma/ZONE
8) ALARM CURRENT : 35Ma ZONE
9) AC FUSE RATING : 500Ma
10) DC FUSE RATING : 1.5Amp
111) BATTERY FUSE RATING : 3Amp
12) DIMENSIONS : (12X12X4)Inch
13) WEIGHT : 6 KG
SYMPTOM SOLUTION
1) Only mains lamp glow Check DC/Bat Fuse
2) Only Power fault lamp glow Check all Fuse
3) Batery backup fail Replace Battery
4) Control switches are not Check cable Belt from Back
board to front board.
5) Display(LED +LCD)
6) None stop fault Check the sautes of same fault
If problems persist remain please call our engineer or E-mail
us.
functioning
Check cable Belt from Back
are not glowing board to front board.